Commissioning of CNC plasma cutting Start-2M

At the plant installed new equipment: plasma cutting machine start-2M. Employees of the plant have been a three-day training course. Currently the machine is put into operation.

Machine Start-2M is classified as thermal cutting machines. As a cutting tool on the machine used plasma and / or oxy-fuel torches. The machine is designed for cutting curly flat metal parts and pieces, longitudinal and transverse cutting sheet metal and metal profiles with a flat surface.

Numerical control system makes it possible to cut out parts of complex shape on a plan designer with sufficient accuracy. The machine can be operated in automatic or manual mode. Automatic mode is required mainly for cutting shaped parts, the manual mode is more suitable for rough cutting of sheet metal and trim the protruding portions of the workpiece.

The machine can be used for cutting ferrous and non-ferrous metals and alloy. Simple and reliable software allows you to quickly master the complex operations of cutting metal and in a short time to enter the machine into operation. To control the machine used UE based on the standard G-code. The transfer of control files on the remote control by using flash cards to a computer hard disk controller machine.